Can you use a spinning reel on a casting rod? I know how some anglers would either confuse or use one reel type over the other! While it’s possible, there are downfalls interchanging them when they are meant for certain fishing applications.
But what is the spinning reel and why should it be made for the spinning rod more than the casting rod? You can check about Spincast Reel reviews to know more detail. Read on as I explain the spinning reel and for what you should use it for.
Contents
Can You Use A Spinning Reel On a Casting Rod?
YES, you can mount a spinning reel on your casting rod. But I don’t recommend it, as it will provide different results, typically negative ones. Not only will using spinning reels on eating rods give you a ton of odd stares, but it affects your rod and reel’s performance, negatively impacting your success as you fish.
There are three reasons why you shouldn’t use the spinning reel on the casting rod:
Spinning Rods Have Oversized Guides
A spinning reel is made for a spinning rod, which would have bigger guides compared to that of a casting rod. Such oversized guides will help your fishing line come off its reel with minimum friction, making your casts longer and more accurate.
If you were to mount a spinning reel on your casting rod with smaller guides, this can affect the cast and accuracy of it. With that in mind, shouldn’t casting rods to act like microwave guide systems like what you see in newer spinning rods?
No, because the initial guide is smaller and the casting rod won’t have smaller guides inside bigger guides, unlike the spinning rod. As a result, a spinning reel will just slow things down and reduce casting efficiency.
The best crankbait rod offers excellent distance and accuracy as you make your cast. Spinning rods allow you to cast in straight lines but have a limited distance.
If you use a spinning reel on the casting rod, it would release your fishing line in a coil, which is why you need a large and wide guide, which casting rods don’t have! The line will be released from its spoon into a coil, but the casting rod’s thin and small guides will slow your line down, limiting the potential cast and distance.
The Rod’s Backbone
You should also look into your rod’s backbone, which affects the way you catch fish if you were to use the wrong reel.
Spinning rods are designed to bend with its guides facing down. With a casting rod, it flexes with guides facing upwards. Fishing rods are designed so the part where guides are located should be made with a soft and flexible material.
The part of your rod behind its guide is the backbone, which isn’t flexible, but stiff. This is what provides your rod the power to reel in heavy fish.
If your rod has no backbone and its sides are made with similar soft and flexible material, it’s as if you were reeling in fish with a big noodle, making it difficult to catch game fish. That’s why you need a flexible and stiff side to your rods.
When mounting a spinning rod on a casting reel, both sides will be too flexible. This will greatly affect the power of your casting rod and lessen the chances of getting a big catch.
The casting rod guides are mounted on the spine facing up so you can catch heavy fish without putting a ton of pressure on your rod. The spinning rod guides go on the bottom of the road for wrestling lighter fish. When using the wrong reel, you will be using the rod upside down, placing too much pressure that can lead to breaking your rod!
Your Line’s Safety
Now, another thing to consider is your fishing line. The coil can latch around your guide closer to the base, preventing anglers from casting if you were to use the wrong reel. This isn’t a common problem, but it’s still a minor annoyance if it were to happen.
Besides this, the line may be under pressure between two guides that are closest to the tip because its guides are under the rod. Again, a small chance, but still a potential risk of damaging your casting rod!
This is especially for those who are just starting out fishing. There’s the potential of losing your line or setting up your equipment incorrectly if you were to use the wrong reel. When you use a casting reel for the casting rod, it lessens the canoe of a backlash and damage, so you don’t waste or spend any more money than you should.
Read More: How To Make A Fishing Rod Out Of Bamboo – Super Easy Steps!
Using Casting Reel On Spinning Rods
Now that you know why you shouldn’t use a spinning reel on a casting rod, can you use a casting reel on a spinning rod?
As mentioned above, no, you shouldn’t. The similar principles I talked about also apply in this situation, impacting your success in the water.
Instead of risking your equipment and paying even more, stick to reels that fit your specific fishing rods and line. You can experiment with the different fishing equipment that works best for you, whether you work best using ultralight spinning reels or baitcasting rods.
Learn more about spinning reels and what fishing applications they are used for in this informative video:
Wrapping It Up
Unfortunately, you should NOT use a spinning reel on a casting rod. While it may still be able to give you decent catches, the reel isn’t built for the line and can risk damaging your equipment. You’re better off using reels made for the specific rod, ensuring that it’s made with heavier-duty construction and materials.
I hope that this article answers your question, “can you use a spinning reel on a casting rod?” Now that you know the answer, make sure that you prepare and invest in the right equipment meant for the waters and fish you plan to catch.
